Maintaining and repairing the device
6.4 Reinstalling the operating system
SIMATIC IPC227G
56 Operating Instructions, 07/2022, A5E50059933-AC
6.4.1 Installing the drivers and software
Requirements
• Windows 10 operating system is installed in your IPC.
• You need to connect a mouse, a monitor and a keyboard to your PC.
• You also need the supplied USB stick to your PC.
Drivers and software list
The following drivers and software need to be installed on Windows 10:
Drivers and software needed
• Step1: Intel® Chipset Device Software
• Step2: Intel® Converged Security Engine
• Step3: Intel® HECI Controller Driver
• Step4: Intel® Gigabit Ethernet Driver
• Step5: Intel® UHD Graphics Driver
• Step6: Intel® Serial I/O Driver
• Step7: Intel® Graphics Command Center
Procedure
1. Connect the supplied USB stick to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the required driver.
6. Follow the below steps and click the icon
to install the required driver.
For a new installation of Windows operating systems, the chipset driver must be installed
before all other drivers, if required.
Step 1: install the chipset driver
1. Click Step1: Intel® Chipset Device Software.
2. Click
to install the chipset driver.
3. Click Next to continue.
4. Click Accept to accept the license agreement.
To Next Page
Loading...
Need help?
General
