8 NCM S7 Diagnostics
A-265
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 01/2007
C79000-G8976-C182-07
8.2.1 Installing and Starting NCM S7 Diagnostics
Installation
NCM S7 Diagnostics is an integrated component of the NCM S7 for Industrial
Ethernet optional package.
NCM S7 Ethernet Diagnostics is installed along with NCM S7 for Ethernet on your
PG.
There are several ways in which you can start the diagnostic tool:
Aus dem Standard-Startmenü von Windows 95/NT über die Programmgruppe
SIMATIC.
Wählen Sie diese Möglichkeit, wenn Sie das STEP 7-Projekt, in dem der CP
konfiguriert wurde, auf Ihrem PG nicht verfügbar ist (Servicezwecke).
Aus dem Eigenschaftendialog des jeweiligen CP von Ihrem STEP 7-Projekt
aus.
From the standard Start menu of
Windows (program group
SIMATIC
"
...
"
NCM).
Use this method if the STEP 7 project
in which the CP was configured is not
available on your PG (for service
purposes).
From the Properties dialog of the CP within
your STEP 7 project.
Alternative 1 Alternative 2
To Next Page
Loading...
Need help?
General
