Singer Stylist 7258 User Manual

10
卸辅助缝台
CONVERTING TO FREE-ARM SEWING
本机可以用于平板或筒式两种缝台。
装上辅助缝台，可以得到比较大的平板缝台。
卸辅助缝台，用双手将辅助缝台向左平移，直至全部移
出。若将它放回原位，将辅助缝台向右平移，直到咔嚓
滑入原位。
大扩展台（选购件）
LARGE EXTENSION TABLE (OPTIONAL)
先将辅助缝台向左移出。
打开大扩展台的撑脚，把大扩展台沿着缝台向右平移，
如图箭头所示将 A、B、C、D 四个插销分别对应卡入
机器的插口。
To place onto the machine, lift the supporting leg of the extension
table, and slide the table into place while tting the guide pins A, B,
C and D into machine as illustrated.
Your machine can be used either as a flat- bed or as a free-arm
model.
With the extension table in position, it provides a large working
surface.
To remove the extension table, hold it rmly with both hands and
pull it off to the left as shown. To replace, slide the extension table
back into place until it clicks.
With the extension table removed the machine converts into a free-
arm model for sewing children’s clothes, cuffs, trouser legs, and
other hard-to-reach places.
扩展台
Extension table
撑脚
Supporting leg

Singer Stylist 7258 Specifications

General

Built-in Stitches	100
Buttonhole Styles	7
Stitch Width	7mm
Needle Positions	13
Speed Control	Yes
Automatic Needle Threader	Yes
LED Display	Yes
Free Arm	Yes
Weight	14.6 pounds
Type	Electronic
Bobbin System	Top Drop-In
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Maximum Stitch Width	7mm
Sewing Speed	750 stitches per minute
Drop Feed	Yes
LCD Screen	Yes
Presser Feet	All-Purpose Foot, Zipper Foot, Buttonhole Foot, Blind Hem Foot, Satin Stitch Foot