Singer Stylist 7258 User Manual

44
锁纽孔
BUTTONHOLE MAKING
自动锁纽孔
AUTOMATIC BUTTONHOLE
锁孔步骤
PROCEDURE
本机提供宽窄两种锁边的锁孔，以及平头、小圆头、圆
头三种头部锁眼。可以自动测量纽扣的尺寸，锁出对应
大小的纽孔。所有的这些过程，只需要简单的一步就可
以完成。
Your machine offers you two different widths of bartack, keyhole
and round end buttonholes sewn by a system that measures the size
of the button and calculates the size of buttonhole required. All of
this is done in one easy step.
* 在需要锁纽孔的布料下面衬入衬布，可以使用定制或
常规的衬布。
* 用一块和布料相同的碎布做试缝。选定要使用的纽扣，
试着锁一个纽孔。
*
Use an interfacing in the area of the garment where buttonholes
are placed. Stabilizer or regular interfacing can be used.
*
Make a practice buttonhole on a scrap of the actual fabric from
your project. Then try the buttonhole with your button.
1. 选择一个纽孔线迹。
Select one of buttonhole patterns.
2. 换上锁纽孔压脚。（参阅第 19 页“更换压脚”）
Replace the presser foot with the buttonhole foot. (Refer to
“Changing presser foot” on page 19.)
4. 拉下锁纽孔控制杆（C）, 使它垂直下落在纽孔限位
（A）和（B）之间。
Lower the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
3. 将纽扣装入压脚的纽扣座内，卡紧。
Insert the button into the buttonhole foot. (Refer to “Using
buttonhole foot” above.)
挡块 A
Tab A
挡块 B
Tab B
锁纽孔压脚
Buttonhole foot

Singer Stylist 7258 Specifications

General

Built-in Stitches	100
Buttonhole Styles	7
Stitch Width	7mm
Needle Positions	13
Speed Control	Yes
Automatic Needle Threader	Yes
LED Display	Yes
Free Arm	Yes
Weight	14.6 pounds
Type	Electronic
Bobbin System	Top Drop-In
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Maximum Stitch Width	7mm
Sewing Speed	750 stitches per minute
Drop Feed	Yes
LCD Screen	Yes
Presser Feet	All-Purpose Foot, Zipper Foot, Buttonhole Foot, Blind Hem Foot, Satin Stitch Foot