Singer Stylist 7258 User Manual

32
曲折缝线迹
ZIGZAG STITCHING
根据缝线、布料、线迹类型及缝纫速度，上线线迹出现
在布料的底面上，但下线不能出现在布料的表面上。
如果下线露出布料的表面，或者布料皱褶，需要稍微调
松上线张力。
The top thread may appear on the bottom depending on the thread,
fabric, type of stitch and sewing speed, but the bobbin thread must
never appear on the top of the fabric.
If bobbin thread is pulling to the top or you are experiencing
puckering, slightly reduce the tension with the Thread Tension
Control.
图中深色方块表示选定此线迹时为默认（缺省）
的针幅和针距。
曲折缝线迹的默认针距是 2 毫米、针幅是 5 毫米。
Dark grey box indicates the Auto/default value set
automatically when the pattern is selected.
For the Zigzag Pattern the stitch length is 2 mm and the
stitch width is 5 mm.
浅色方块表示，可以调节的针幅和针距值。
The light grey boxes indicate all the possible personal
preference options available to set manualy.
调节针幅和针距
ADJUSTING STITCH WIDTH AND LENGTH
设置
SETTINGS
：
安装压脚 - 万能压脚
Presser foot - General Purpose Foot
上线张力 - AUTO（自动）
Thread tension control - AUTO
针幅
STITCH WIDTH
针距
STITCH LENGTH
反面
Under side
正面
Top side

Singer Stylist 7258 Specifications

General

Built-in Stitches	100
Buttonhole Styles	7
Stitch Width	7mm
Needle Positions	13
Speed Control	Yes
Automatic Needle Threader	Yes
LED Display	Yes
Free Arm	Yes
Weight	14.6 pounds
Type	Electronic
Bobbin System	Top Drop-In
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Maximum Stitch Width	7mm
Sewing Speed	750 stitches per minute
Drop Feed	Yes
LCD Screen	Yes
Presser Feet	All-Purpose Foot, Zipper Foot, Buttonhole Foot, Blind Hem Foot, Satin Stitch Foot