Singer Stylist 7258 User Manual

19
更换压脚
CHANGING PRESSER FOOT
确认机针处在最高位，提起压脚提升杆。
1. 按压脚柄后方的释放按钮，移去压脚。
2. 将想要使用的压脚放在针板上，压脚的销对准压脚柄
的凹槽。
3. 放下压脚提升杆，使压脚柄扣住压脚销。
Be sure needle is in the up position. Raise presser foot lifter.
1. Push presser foot release lever to remove the foot.
2. Place the desired foot on the needle plate aligning the presser
foot pin with the foot holder.
3. Lower the presser foot lifter so that the foot holder snaps on the
foot.
压脚释放钮
Foot release lever
压脚柄
Foot holder
压脚提升杆
Presser foot lifter

Singer Stylist 7258 Specifications

General

Built-in Stitches	100
Buttonhole Styles	7
Stitch Width	7mm
Needle Positions	13
Speed Control	Yes
Automatic Needle Threader	Yes
LED Display	Yes
Free Arm	Yes
Weight	14.6 pounds
Type	Electronic
Bobbin System	Top Drop-In
Adjustable Stitch Length	Yes
Adjustable Stitch Width	Yes
Maximum Stitch Width	7mm
Sewing Speed	750 stitches per minute
Drop Feed	Yes
LCD Screen	Yes
Presser Feet	All-Purpose Foot, Zipper Foot, Buttonhole Foot, Blind Hem Foot, Satin Stitch Foot