WARNING
■
Please take note of the general points relating to the use of assistance
systems » page 213, in section Introduction.
■
Having the correct tyre inflation pressure is always the driver's responsi-
bility. Tyre pressure should be checked regularly » page 285.
■
The system cannot warn in case of very rapid tyre inflation pressure loss,
e.g. in case of sudden tyre damage.
■
Before storing the pressures, the tyres must be inflated to the specified
inflation pressure » page 285. If the wrong pressure valuesare stored, the
system may not issue any warnings, even if the tyre pressure is too low.
CAUTION
To ensure proper system function, the tyre pressure values must be stored ev-
ery 10,000 km or 1x a year.
Storing the tyre pressure values and Infotainment display
Fig. 299
Button for storage/example of
the screen: a change in the front
left tyre pressure is indicated
Read and observe and on page 254 first.
Procedure for storing the tyre pressure values
›
Inflate all the tyres to the specified pressure.
›
Turn on the ignition and switch on Infotainment.
›
In the infotainment system, in menu
/ tap on function surface Tap
→
Vehicle status
.
›
Use the function surfaces
to select menu item Tyre Press. Loss Indicator.
›
Tap the function surface » Fig. 299.
In addition, follow the instructions that appear on the screen.
A message on the screen informs about the storage of the tyre pressure val-
ues.
Note
When the warning light appears in the instrument cluster, the affected tyre
can be displayed on the infotainment system » Fig. 299.
254
Driving
To Next Page
Loading...
Need help?
General
