SMC Networks HRW015-H User Manual

HRX-OM-K003
Chapter 1 Safety
1.6 Emergency Measures HRW Series
1-14
 Reset of emergency off [EMO] switch
1. Before restarting, always make sure that the cause of the emergency off condition (The
reason why the EMO switch was activated) has been eliminated from the power supplies,
the system and peripheral equipment.
2. With the cause completely eliminated,
turn the emergency off [EMO] switch
clockwise to reset.
The EMO button returns to its original position.
3. The screen then changes from the “Model Indication screen” to “Status screen 1” as power
is being restored to the system.
Figure 1-16 Emergency Off [EMO] Switch
No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may occur if disregarded.
When the system is in remote mode, the remote mode is retained
despite the power outage. Thus the system operation is to resume as
the start signal is issued from your system.
 No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may be concerned occur if disregarded.

 No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may be concerned occur if disregarded.

 No automatic recovery is applied to the emergency off [EMO] switch.
Always eliminate the cause of activating the EMO before resetting.
Potential serious accidents may be concerned occur if disregarded.

SMC Networks HRW015-H Specifications

General

Brand	SMC Networks
Model	HRW015-H
Category	Chiller
Language	English