SMC Networks HRW015-H User Manual

HRX-OM-K003
Chapter 4 System Startup and Shutdown
4.4 Requirement for System Startup HRW Series
4-4
4.4 Requirement for System Startup
4.4.1 Turning ON power
1. Make sure that the main breaker for this system is OFF, and release lockout/tagout of the
power breaker on customer side (primary side). Then, turn ON the power.
2. Turn ON the main breaker of this system.
The “Model Indication screen” are displayed in sequence on the LCD screen. The screen will change to the
“Status screen 1” in approx. 20 seconds, and the system is ready to run.
Figure 4-2 Main Breaker at ‘ON’
Press the emergency off [EMO] switch immediately upon ocurrence of
abnormal conditions. Be sure to turn OFF the main breaker afterwards.
Front
ON
Model Indication screen
Status screen 1

SMC Networks HRW015-H Specifications

General

Brand	SMC Networks
Model	HRW015-H
Category	Chiller
Language	English