SMC Networks HRW015-H User Manual

HRX-OM-K003
Chapter 3 Transporting and Installation
3.2 Installation HRW Series
3-4
3.2.1 Installation conditions
System installation is not allowed outside or in the conditions described below.
Potential system malfunction and damage may occur if disregarded.
Clean room specifications are not applied to this system. The pump and ventilating
fan installed in this system generate particles.

Location that is exposed to water, water vapor, salt water, and oil

Location that is exposed to dust

Location that is exposed to corrosive gas, organic solvent, chemical solution,
and flammable gas (this system is not flame-proof)

Location where ambient temperature is out of the following range:
In transportation -40 to 70°C (with no water or circulating fluid in piping)
In storage 0 to 50°C (with no water or circulating fluid in piping)
In operation 10 to 35°C

Location where ambient humidity is out of the following range or where
condensation forms:
In transportation and storage 15 to 85%
In operation 30 to 70%

Location that is exposed to direct sun light or radiant heat

Location that is near heat sources and poor in ventilation

Location that is subjected to abrupt changes in temperature

Location that is subjected to intense electromagnetic noise (intense electric field,
intense magnetic field, or surges)

Location that is subjected to static electricity, or condition that discharges static
electricity to the system

Location that is subjected to strong high frequencies

Location that is subjected to potential lightning damage

Location with altitudes of 1000m or higher (except for system storage and
transport)

Location that is affected by strong vibrations or impacts

Condition that applies external force or weight causing the system deformation

Condition with no adequate space for maintenance as required

SMC Networks HRW015-H Specifications

General

Brand	SMC Networks
Model	HRW015-H
Category	Chiller
Language	English