SMC Networks LECPA Series User Manual

- 18 -
3.2 Parts description
The detailed descriptions of each part are as follows:
A side(driver version)
A Side
No.
Label
Name
Description
(1)
PWR
Power LED (green)
Power ON/No alarm: Green light
Data (step data, parameter) writing /green light flashing
Caution
Do not turn off the input power supply for the driverr while the
data is being written (power supply LED (green) flashes).
Data (step data ,parameter) may not be written correctly.
(2)
ALM
Power LED (red)
Power ON/Alarm: Red light
(3)
CN5
Parallel I/O
Connector (20 pins)
Used to connect PLC, etc. with the I/O cable.
(4)
CN4
Serial I/O
Connector (8 pins)
Used to connect the teaching box, PC, etc.
(5)
CN3
Encoder connector
(16 pins)
Used to connect the actuator cable.
(6)
CN2
Motor power
connector (6 pins)
(7)
CN1
Power connector
(5 pins)
Used to connect the driver power supply (24 VDC) with the
power supply plug.
Common power (-) ,Motor power (+) ,Control power (+) ,Stop
signal (+) ,Lock release (+)
(8)
―
Applicable electric
actuator model
number label
The label indicating the applicable electric actuator model.
It also indicates the type of the parallel I/O (PNP/NPN).
(9)
―
Driver label
The label indicating the part number of the driver.
(10)
―
FG
Functional ground
(When the driver is mounted, tighten screws and connect the
grounding cable)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(9)
(10)
ARX8300073
NPN V１.00
Serial No.label of driver version
Driver I/O type
Driver version label
(Ex.) Driver I/O type "NPN type"
Driver version "V1.00"
(8)

SMC Networks LECPA Series Specifications

General

Brand	SMC Networks
Model	LECPA Series
Category	Industrial Electrical
Language	English