SMC Networks LECPA Series User Manual

- 29 -
6. CN5: Parallel l/O Connector
6.1 Parallel I/O specifications
● Input specifications ● Output specification
(NPN,PNP common,pulse signal input
(NPN and PNP common)
terminal is excluded.
)
6.2 Parallel I/O type (NPN/PNP type)
There are two types of parallel I/O for this driver: NPN type(LECPAN□□-□) and PNP type(LECPAP□□-□).
(1) Parallel I/O input circuit (same for both NPN and PNP type)
NPN and PNP common
●NPN type (LECPAN□-□)
●PNP type (LECPAP□-□)
(2) Parallel I/O output circuit
●NPN type(LECPAN□-
□
)
Inside of the driver Inside of the driver
Outside Outside
●PNP type(LECPAP□-□)
Inside of the driver Inside of the driver
Outside Outside
TLOUT<12>
to WAREA<13>
COM- <2>
No.
Item
Specification
1
Output circuit
Internal circuit and photo
coupler isolation
2
Number of outputs
9 outputs
3
Max. voltage
between terminal
30VDC
4
Max. output current
10mA
5
Saturation voltage
4.0V (Max.)
No.
Item
Specification
1
Input circuit
Internal circuit and photo
coupler isolation
2
Number of
inputs
5 inputs
3
Voltage
24VDC +/- 10%
4
Input current
when ON
2.4mA+/-20% (at 24VDC)
5
Input current at
OFF
Current 1.5mA or less
Voltage 11V or less
(a)
COM+〈1〉
(b)
SETUP<7> to TL<11>
BUSY<14>
to AREA〈20〉
COM- <2>
COM+ <1>
BUSY〈14〉
to AREA〈20〉
Inside of the driver
(a)
(b)
Outside
(a)
COM-〈2〉
(b)
SETUP<7> to TL<11>
COM+ 〈1〉
TLOUT<12>
to WAREA<13>
10Ω
10Ω
10Ω
10Ω
10kΩ
1kΩ

SMC Networks LECPA Series Specifications

General

Brand	SMC Networks
Model	LECPA Series
Category	Industrial Electrical
Language	English