C
ONSOLE
I
NTERFACE
4-8
Showing Port Statistics
You can display standard statistics on network traffic from the Interfaces
Group MIB, Ethernet-like MIB, and RMOM MIB. These statistics display
errors on the traffic passing through each port. This information can be
used to identify potential problems with the switch (such as a faulty port or
unusually heavy loading). All values displayed have been accumulated since
the last system reboot, and are shown as counts per second. Statistics are
refreshed every 5 seconds.
Field Attributes
See “Showing Port Statistics” on page 3-12.
Console – Click Status and Counters
=>
Port Counters.
Tiger Switch 10/100 6709FL2 : Port Counters
===========================
Port TxGoodPkt TxBadPkt RxGoodPkt RxBadPkt TxAbort Collision DropPkt
----------------------------------------------------------------------------
1. 0 0 0 0 0 0 0
2. 386113 0 481088 0 0 0 0
3. 0 0 0 0 0 0 0
4. 0 0 0 0 0 0 0
5. 0 0 0 0 0 0 0
6. 2527 0 136 0 0 0 0
7. 0 0 0 0 0 0 0
8. 2928 0 136 0 0 0 0
9.0000000
actions-> <Quit>
Configure the action menu.
Tab=NextItem BackSpace=Previous Item Quit=Previous menu Enter=Select Item
To Next Page
Loading...
Need help?
General
