C
ONSOLE
I
NTERFACE
4-28
MAC Address Configuration Menu
Use the MAC Address Configuration menu to statically bind MAC
addresses to a specific port or to filter MAC addresses from the system.
Note: Multicast filtering can only be configured from the Web interface.
(See “Configuring Multicast Filtering” on page 3-21.)
Setting Static Addresses
When you configure static MAC addresses, traffic sent from devices listed
in the static address table will only be accepted on the specified interface.
Static addresses remain in the switch’s address table, regardless of whether
the device is physically connected to the switch. This saves the switch from
having to re-learn a device’s MAC address when the disconnected or
powered-off device becomes active on the network again.
Tiger Switch 10/100 6709FL2 : MAC Address Configuration
===========================
Static MAC Address
Filtering MAC Address
Previous Menu
Return to main menu.
Tab=Next Item BackSpace=Previous Item Enter=Select Item
Menu Description Page
Static MAC Addresses Sets entries for address, port number, and
VLAN identifier
4-28
Filtering MAC Address Filters specified addresses 4-30
To Next Page
Loading...
Need help?
General
