C
ONSOLE
I
NTERFACE
4-30
Configuring Address Filtering
Use the Filtering MAC Address page to drop traffic from unwanted
stations based on the source MAC address (and associated VLAN if
tagged VLANs are enabled).
Field Attributes
• MAC Address – Source MAC address.
•Vlan ID – ID of configured VLAN (1-4094). This option is only
available if IEEE 802.1Q tagged VLANs are enabled (page 4-23).
Console – Click Switch Static Configuration
=>
MAC Address
Configuration
=>
Filtering MA
C Address
. Click <Add> to open the Add
Filter MAC Address page. Enter a MAC address and associated VLAN,
then save your settings.
Tiger Switch 10/100 6709FL2 : Static MAC Address Configuration
===========================
Mac Address Port num Vlan ID Mac Address Port num Vlan ID
------------------------------- -------------------------------
0030299434DE 2 1
actions-> <Add> <Edit> <Delete> <Save> <Quit>
Add/Edit/Delete static MAC addresses.
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter=Select Item
To Next Page
Loading...
Need help?
General
