How to use the ZIP*, RIDA* and CD/DVD* drive and the USB interface*
For the download of the TIP* and OTS XTrain* reports (F 2-79), the user data and access rights (F 2-10),
the diagnosis report (F 2-89) and the error report (F 2-92) you can insert a CD-R or CD-RW into the drive
even shortly before starting the data transmission. After the transmission is done you can remove the disk
by pressing the shown eject button at the drive.
If you wish to copy images to a CD or from a CD or DVD or to recall images directly from a CD or DVD, in-
sert the latter into the drive before calling up the IMS menu (F 2-44). When recalling images stored on
the CD or DVD, you can remove the CD or DVD only after calling up the IMS menu again and leaving it with
s!
After starting a copy or transmission process to a CD-R or CD-RW,
first the illustrated CD menu opens. You have the following setting
possibilities:
Delete CD/DVD
before writing:
If you have inserted a rewrit-
able CD-RW, you can delete all
data which is already on the
CD by selecting the first menu
option.
Close CD/DVD after
writing:
If you want to ensure that after writing the data no further data can be written to
the CD, select this option.
Then start the writing procedure with
r.
S
Attention!
After the termination of the writing process, the drawer of the CD drive opens automatically! En-
sure that all lids in front of the drive stay open until the termination of the process!
1340
95587413 01/01/09 © Smiths Heimann
S
Attention!
Even if you do not select this setting, ex-
isting files on the CD are overwritten by
files of the X-ray unit with the same file
name!1330
2-7
To Next Page
Loading...
Need help?
General
