To Next Page

To Previous Page

A6T/A6/A5 Portable Ultrasonic Diagnostic System

4701-0040-01A

3-83

3.6.3 M mode measurement

In M mode the measurement menus are:

Fig. 3.6.3 M mode measurement menu

3.6.3.1 Distance Measurement

Function: To measure the distance of two points on the M image.

Measurement method:

1. In M or B/M mode frozen state, press the【Calc】key to pop up the

Meas & Calc menu in M mode, move the trackball, use the cursor to

select “Distance “ , press the【SET】key to confirm going to Distance

Measurement mode.

2. Move cursor to the measurement start point , press the 【SET】key,

on the measurement start point it displays the fix mark “ +”.

3. Use the trackball to move the cursor. Now the cursor can only be

shifted in the vertical direction. In the result window it displays the

measurement value.

4. Use the trackball to shift the cursor to the measurement end point,

press the【SET】key, on the measurement end point it displays the fix

mark “+”, the measurement result is fixed, and it ends the

measurement.

5. Repeat steps 1 to 4 to perform the next measurement.

Sonoscape A5 User Manual

Questions and Answers: