A6T/A6/A5 Portable Ultrasonic Diagnostic System
4701-0040-01A
3-10
The setting items for Dicom Setting are shown below:
Local Setting:
z Active
z
DHCP Setting The system IP address configuration.
z
Fix IP Configure Static IP, Sub IP, Gateway, Printer
IP address.
DICOM Server:
z Transfer to USB User can transfer DICOM files through
USB;
z Transfer to Server
In General Setting, click [Ok], it will exit and save the current setting info; click
[Cancel], it will exit without saving.
3.4.3.3 Formula Select
In System Setting page, click [Formula Select], go to Formula Select page.
Click [Save] to exit and save the current setting info; click [Exit] to exit without
saving the current setting info.
To turn on/off network; to check Active select
box means to enable the function; only when
the function is active, the system can perform
network connection; when the function is
active, select DHCP Setting or Fix IP.
User can configure remote IP, port, Access
number. When it is setted, DICOM files can
be transferred through network;
To Next Page
Loading...
Need help?
General
