Chapter 4 Recording and Playback
4-6 Chapter 4 Recording and Playback
4-2 Playback
4-2 Playback
This section describes playback from the VTR and
hard disk built into the unit.
4-2-1 Preparations for Playback
Switch settings
Before beginning playback, make any necessary
switch settings.
For details of the settings of each of the switches, refer to
the pages indicated in parenthesis.
TC switch (see page 2-6):
select the time code to be
displayed
REMOTE/LOCAL switch (see page 2-7):
9P indicator off
PB controls (see page 2-5):
adjust the audio playback
levels
PB button (see page 2-9): lit
CTL/TC/UB button (see page 2-9 ):
select the time data to be displayed
PRESET/REGEN switch (see page 2-6):
select the output time code
INT/EXT switch (see page 2-6): INT
Device specification buttons (see page 2-12):
selecting the device on which operations are
to be carried out (see page 4-2)
AUDIO INPUT/MONITOR SELECT buttons (Before
Version 2.00)
AUDIO INPUT/MIXING/MONITOR SELECT buttons
(Version 2.00 or later) (see page 2-4): select the audio
channel(s) to be monitored
POWER switch: ON
To Next Page
Loading...
Need help?
General
