Correcting
a
failed
photo
automatically
(AUTO
TOUCH-UP)
Adjustment takes effect only on the image being
printed. The original image will not
be
adjusted.
--
SILKYPIX
t1
The "Skin Smoothing," "WB Correction," and
"Auto Dodging" correction functions
of
the
printer use the technology
of
Ichikawa Soft
Laboratory.
• After the Auto Touch-up adjustment, you cannot
make a trimming print
of
an image that has been
enlarged by pressing
EF<.
• Depending on the image, the Auto Touch-up
adjustment may not take effect properly. In this
case, select "Adjust" from the Edit menu to adjust
the image quality manuaIly (page 22).
• Do not remove the memory card
or
external device
during the Auto Touch-up adjustment.
• Depending on the condition
of
the image, the
correction may take some time.
The automatic red-eye
correction function
of
this
printer uses the technology
of
FotoNation Inc. in the U.S.A.
FotoHarkm-
If you have set a
print
quantity
for
multiple images
All the images with print quantity settings
are adjusted. To display other images,
press
~/I>.
To change the
print
quantity
Press ENTER to display the print quantity
indication. Then press
~v
to set the print
quantity and then press ENTER.
2 Press PRINT.
Printing
of
the selected image(s) starts.
1 Select the image that you want to
adjust and then press AUTO
TOUCH-UP.
Adjustment
of
the selected image starts.
The adjustment results will be displayed
on the screen. When a human face is
detected, the face is displayed with a
frame as the adjustments proceed.
To
check
the adjustment result
more clearly:
Press
EF<
to enlarge the image. (The image
will not be enlarged when printed.)
To
display
the original image
(before adjustments) again
Press AUTO TOUCH-UP. To display the
adjusted image, press AUTO TOUCH-UP
again.
Saving a corrected image
Press MENU, and the confirmation dialog box
is displayed. Press
~/I>
to select "Yes," and
then press ENTER. An adjusted image is saved
as a new file. (page 25)
20 GB
To Next Page
Loading...
Need help?
General
