Sony FWD-42PV1 User Manual

39 (GB)
Controlling Power On/Off Automatically (Timer Function)
On/Off Timer Function
1 In the TIMER/CLOCK menu, press M / m to move
the cursor (yellow) to “On/Off Timer” and press
ENTER.
The following menu appears on the screen.
TIMER/CLOCK
Clock Set
Clock Display:
On/Off Timer
Off
Set
ENTER
Exit
MENU
Select
Every day
Day of Week
2 Select either “Every day”or “Day of Week” with
M / m and press ENTER.
When “Day of Week” is selected, you can set a
specific time for each day of a week.
When “Every day” is selected, the following
screen appears on the screen.
TIMER/CLOCK
On/Off Timer
[On Time]
Repeat 0 : 00
Every Day
[Off Time]
0 : 00
Set
ENTER
Exit
MENU
Select
3 Press ENTER. The following menu appears on the
screen.
TIMER/CLOCK
On/Off Timer
[On Time]
Repeat 00 : 00
Every Day
[Off Time]
00 : 00
Set
ENTER
Exit
MENU
Select
0 : 00 0 : 00
Repeat
4 When you want to apply the setting to every day
of week, change
to and press ENTER.
If you press ENTER with the radio button set to
, the setting will be only applied once.
TIMER/CLOCK
On/Off Timer
[On Time]
Repeat 00 : 00
Every Day
[Off Time]
00 : 00
Set
ENTER
Exit
MENU
Select
0 : 00 0 : 00
Repeat
5 To set the On Time, change to with M / m
and press ENTER.
TIMER/CLOCK
On/Off Timer
[On Time]
Repeat 00 : 00
Every Day
[Off Time]
00 : 00
Set
ENTER
Exit
MENU
Select
0 : 00 0 : 00
Repeat
6 Press M / m to set the On Time and press ENTER.
The hour is set and the background of the minute
display turns to yellow.
7 Press M / m to set the minute and press ENTER.
Press < to return to the screen shown in step 2.
8 Set the Off Time as you set the On Time.
9 Press ENTER.
The screen returns to the screen shown in step 2.
Note
The time is not preset in the factory setting, so “-- : --”
is displayed for the clock.

Sony FWD-42PV1 Specifications

General

Depth	121 mm
Width	1033 mm
Height	631 mm
Weight	29000 g
HD type	Not supported
I/O ports	-DVI-HDCP; Audio In -D-sub 15-pin (RGB / YUV), DIV; Audio In Remote (RS-232C) D-sub 9-pin, Audio Out, Control S In/Out; -S-Video In / Out; Audio In, Composite In Yes, Composite Out
Audio system	Surround (Off / Hall / Simulated)
Product color	Black
Audio (L/R) in	1
Noise reduction	Yes
Display diagonal	42 \
Display brightness	50 cd/m²
Display resolution	852 x 480 pixels
Display technology	Plasma
Power requirements	100 - 240V, 50/60Hz (3.5A max)
Contrast ratio (typical)	-
Display number of colors	1.073 billion colors
Storage temperature (T-T)	-10 - 40 °C
Analog signal format system	NTSC, PAL, SECAM
Operating temperature (T-T)	0 - 35 °C
Power consumption (typical)	260 W
Operating relative humidity (H-H)	20 - 90 %