144
You can record moving pictures with sound on “Memory Stick”s.
The picture and sound and recorded up to the capacity of “Memory Stick” (MPEG
MOVIE EX).
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Make
sure that the LOCK switch is set to the left (unlock) position.
(2) Press START/STOP. Your camcorder starts recording. The camera recording
lamp located on the front of your camcorder lights up. The picture and sound
are recorded up to the remaining capacity of “Memory Stick”. For more
information about recording time, see page 125.
To stop recording
Press START/STOP.
Recording moving pictures on “Memory
Stick”s – MPEG movie recording
2
320
40min REC 0:00
:
03
15
min
BBB
FN
INDEXPLAY
[a]
[b]
[a]: Recording time that can be recorded on
the “Memory Stick”.
[a] [b]: These indicators are displayed for five
seconds after pressing START/STOP.
This indicator is not recorded.
To Next Page
Loading...
Need help?
General