47
Advanced Recording Operations
You can record still images on a “Memory Stick” in the tape recording or tape recording
standby. You can also record still images on a tape (p. 52).
Before operation
•Insert a “Memory Stick” into your camcorder (p. 119).
•Set PHOTO REC in to MEMORY in the menu settings (The default setting is
MEMORY).
(1) In the standby, keep pressing PHOTO lightly until a still image appears. The
CAPTURE indicator appears. Recording does not start yet. To change the still
image, release PHOTO, select a still image again, and then press and hold
PHOTO lightly.
(2) Press PHOTO deeper.
Recording is complete when the bar scroll indicator disappears.
The image when you pressed PHOTO deeper will be recorded on the
“Memory Stick.”
Notes
•Do not shake or strike your camcorder when you record still images.
The image may fluctuate.
•You cannot record still images on a “Memory Stick” during following operations
( indicator flashes on the screen.):
– Wide mode
– Fader
– Picture effect
– Digital effect
– Super NightShot
– Color Slow Shutter
– MEMORY MIX
“Memory Stick”
For details, see page 117 for more information.
— Advanced Recording Operations —
Recording still images on a “Memory
Stick” during tape recording
1
2
1 / 6
CAPTURE
SFN
640
SFN
640
PHOTO
PHOTO
[a]: Number of recorded images
[b]: Approximate number of images that
can be recorded on the “Memory
Stick”
[a][b]
To Next Page
Loading...
Need help?
General