40
You can monitor the playback picture on the screen. If you close the LCD panel, you can
monitor the playback picture in the viewfinder. You can control playback using the
Remote Commander supplied with your camcorder.
(1) Prepare the power supply and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME.
– : To turn down
+ : To turn up
When you close the LCD panel, sound is muted.
To stop playback
Press x.
— Playback – Basics —
Playing back a tape
45
6
2
1
3
REW
PLAY
VOLUME
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
PO
W
ER
To Next Page
Loading...
Need help?
General