74
You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make a frame recording.
We recommend that you use a tripod, and operate your camcorder using the Remote
Commander after step 4.
(1) In the standby, press MENU, then turn the SEL/PUSH EXEC dial to select
FRAME REC in
, then press the dial (p. 201).
(2) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(3) Press MENU to erase the menu display.
The FRAME REC indicator lights up.
(4) Press START/STOP to start frame recording. Your camcorder makes a
recording for about six frames, and returns to recording standby.
(5) Move the subject, and repeat step 4.
To cancel the frame recording
Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.
Note
The remaining tape time is not indicated correctly if you use this function continuously.
When using the frame recording
The last recorded frame is longer than other frames.
Frame by frame recording
– Frame recording
2
4
CAMERA SET
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
ON
[
MENU
]
:
END
CAMERA SET
D ZOOM
PHOTO REC
16:9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
OFF
ON
[
MENU
]
:
END
STBY
STBY
MENU
To Next Page
Loading...
Need help?
General