164
You can enlarge still images recorded on a “Memory Stick.” You can select and view a
desired part from the enlarged still image. Also, you can copy the desired part of the
enlarged still image to tapes or “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY/NETWORK (DCR-TRV50 only). Press FN
to display PAGE1 during the memory playback (p. 120).
When you set the POWER switch to VCR, press FN and select PAGE2 during
the memory playback (p. 24).
(2) Press PB ZOOM. PB ZOOM screen appears.
(3) Press the area that you want to enlarge in the frame on the PB ZOOM screen.
The area you pressed moves to the center of the screen, and the playback
image is enlarged approximately at twice the size. If you press the other area,
the area moves to the center of the screen.
(4) Adjust the zoom ratio by the power zoom lever.
You can enlarge the image from approximately 1.1 times up to five times its
size.
W : Decreases the zoom ratio
T : Increases the zoom ratio
To cancel PB ZOOM
Press END.
Enlarging still images recorded on
“Memory Stick”s – Memory PB ZOOM
1
4
FN
2
PB
ZOOM
MEMORY PLAY
3/14
END
100–0003
1360
MEMORY PLAY
3/14
END
100–0003
1360
W
T
PB ZOOM
PB ZOOM
× 5.0
To Next Page
Loading...
Need help?
General