39
Recording
– Basics
Checking recordings – END SEARCH/EDITSEARCH/Rec Review
Rec Review
You can check the last recorded section.
Press the 7 – side of EDITSEARCH momentarily in the standby.
The section you have stopped most recently will be played back for a few seconds, and
then your camcorder will return to the standby. You can monitor the sound from the
speaker or headphones.
End search
When you use a cassette without cassette memory, the end search function does not
work once you eject the cassette after you have recorded on the tape. If you use a
cassette with cassette memory, the end search works even once you eject the cassette.
If a tape has a blank portion between recorded portions
The end search may not work correctly.
To Next Page
Loading...
Need help?
General