23
Adjusting the Camera
Operation Using the Supplied Infrared Remote Commander
1 Set the IR SELECT switch on the rear
of the camera you want to operate to 1,
2 or 3.
2 Press the CAMERA SELECT button
on the infrared remote commander
that corresponds to the number set in
step 1.
Then, you can operate the camera(s)
specified by number. Every time you operate
the camera(s) using the infrared remote
commander, the CAMERA SELECT button
pressed in step 2 lights.
Adjusting the
Camera
Focusing the camera on a subject
automatically
Press the AUTO button.
The camera focuses on the subject at the
center of the screen automatically.
Focusing the camera on a subject
manually
After pressing the MANUAL button, press
either the FAR or the NEAR button to have
the camera focus on the subject.
Operating Multiple Cameras
with the Infrared Remote
Commander
CAMERA
SELECT
Focusing on a Subject
Focusing on a far
subject
Focusing on a
near subject
To Next Page
Loading...
Need help?
General
