24 Storing the Camera Settings in Memory — the Presetting Feature
When you shoot a subject with a light source
behind it, the subject becomes dark. In such
a case, press the BACK LIGHT button.
To cancel the function, press the BACK
LIGHT button again.
The BACK LIGHT function is effective if
MODE is set to FULL AUTO in the
EXPOSURE menu of the camera.
Storing the Camera
Settings in Memory
— the Presetting
Feature
Up to 16 combinations of settings (16
positions) including camera position,
zooming, focusing, and backlighting, can be
preset.
For details of the camera settings to be
preset, see “Preset Items” (page 36).
1 Press the PAN-TILT RESET button to
reset the pan/tilt position.
2 Adjust the position, zooming,
focusing and backlighting of the
camera (page 21 to page 24).
3 While holding down the PRESET
button, press any of the POSITION
buttons, 1 to 6, in which you want to
store the settings.
Shooting with Back Lighting
Note
Subject
appears
brighter.
To Next Page
Loading...
Need help?
General
