Sony SRG-X400 User Manual

41
FOCUS Menu (SRG-X120/
HD1M2)
The FOCUS menu is used to select the focus
mode.
You can set the menu from the Administrator
menu on a web browser.
For details, see “PTZF control tab” (page 88).
MODE (Focus - Focus mode)
Select the focus mode.
[AUTO]: The camera focuses automatically.
[MANUAL]: You can focus manually. Adjust
using the supplied remote commander or
optional remote controller.
Notes
Select [MANUAL] and adjust the focus manually
when shooting the following objects.
• White walls and other objects without contrast
• Objects behind glass
• Objects with horizontal stripes
• Objects on which bright lights are cast or
reflected
• Nightscapes and other dark objects with
blinking lights
• Lit objects shot with darkened exposure
adjustment or exposure compensation
settings
PICTURE/OPTICAL FILTER
Menu
The PICTURE/OPTICAL FILTER menu is used to
adjust picture quality improvement features and
optical filters.
You can set the menu from the Administrator
menu on a web browser.
For details, see “Picture tab” (page 69).
PICTURE
HIGH RESOLUTION (Picture - High
resolution mode)
You can set [HIGH RESOLUTION] (High resolution
mode) to [ON] or [OFF]. When set to [ON], you
can enjoy emphasized edge and high-resolution
images.
Notes
• When set to [ON], image noise may increase
more than when set to [OFF].
• When [MODE] is set to [MANUAL] in [DETAIL],
the function is not available.
NOISE REDUCTION (Picture - NR mode)
You can obtain clearer images by removing
unnecessary noise (fixed pattern and
randomized noise) with [NOISE REDUCTION].
Choose from [OFF] or level 1 through level 5.
When you select [ADVANCED], you can set up [2D
NR LEVEL] and [3D NR LEVEL] independently.
2D NR LEVEL (Picture - 2D NR level)
This is enabled when [NOISE REDUCTION] is
[ADVANCED]. Choose from [OFF] or level [1]
through level [5] for noise reduction.
3D NR LEVEL (Picture - 3D NR level)
This is enabled when [NOISE REDUCTION] is
[ADVANCED]. Choose from [OFF] or level [1]
through level [5] for noise reduction.

Sony SRG-X400 Specifications

General

Type	IP security camera
PTZ modes	Digital PTZ
PTZ control	Yes
Placement supported	-
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling/Pole
Product color	White
LED indicators	LAN, Power
Pan range	-170 - 170 °
Pan speed	300 °/sec
White balance	Auto, Indoor, Manual, One push, Outdoor
Tilt angle range	-20 - 90 °
Camera shutter speed	1/1 - 1/10000 s
Minimum illumination	1.6 lx
Sensor type	Exmor
Number of sensors	1
Optical sensor size	1/2.5 \
Focus	Motorized/Manual
Digital zoom	40 x
Focal length range	4.4 - 88 mm
Maximum aperture number	3.8
Minimum aperture number	2
Closest focusing distance	0.08 m
LED type	IR
Bit rate control	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Total megapixels	8.5 MP
Gain control type	Auto/Manual
Maximum resolution	3840 x 2160 pixels
Supported video modes	720p, 1080i, 1080p, 2160p
Video compression formats	H.264, H.265
Supported graphics resolutions	640 x 360, 720 x 480, 720 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Voice codecs	AAC
Audio output channels	2 channels
Streaming method	Multicast
Supported network protocols	IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA over IP
DC output voltage	12
Power source type	DC, PoE
Power consumption (typical)	25.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Depth	200.2 mm
Width	158.4 mm
Height	177.5 mm
Weight	1800 g