Sony SRG-X400 User Manual

60
Operating the Camera from a Web
Browser
This section explains how to monitor the image
from the camera using a web browser.
Camera settings should be set by administrator.
For details on the camera settings, see
“Configuring the Camera from a Web Browser”
(page 63).
When you operate pan, tilt, zoom, etc with the
remote controller, see “Operations Using the
Supplied Infrared Remote Commander”
(page 26).
Notes
• Do not operate the camera from a network and
with a remote controller simultaneously.
• About 2 minutes after turning on the power,
the camera will be automatically reset to the
pan/tilt position and the camera settings
stored in Preset 1 (Pan/tilt reset). For details on
the setting items applied for start-up, see
“Preset Items and Image Setting File Items”
(page 96).
• If the camera settings are not stored in Preset 1,
the camera settings are not stored in the
memory and reset to the default settings when
the power is turned on.
About Authentication
To access the camera from a web browser, two
authentication types are required. Therefore, the
authentication screen is displayed twice when
you access the camera from a web browser.
HTTP authentication: Sends/receives CGI
commands that controls the camera
settings.
RTSP authentication: Displays H.264
streaming on a web browser.
When video codec H.265 is applied, One Shot
JPEG image is displayed on a web browser and
RTSP authentication is not required. RTSP
authentication can be turned off in [RTSP
Authentication] of the User tab on the
Administrator menu.
Note
The RTSP authentication setting affects getting
the RTSP streaming on programs other than a
web browser. When you want to prevent unset
users from getting the streaming, turn on the
[RTSP Authentication].
Operating the Camera
This section explains the names and functions of
the parts of the live viewer. For details, see the
specified pages.
Live viewer
Main Menu
Live
Displays the live viewer window.
Setting
Displays the administrator setting menu (page
63).
You need to log in as an administrator to operate
this function.
License notice
Displays the software license agreements, etc.
Language
Set the language to be used in the viewer
display.
You can select from [Japanese], [English],
[French], [Spanish], [German], [Italian], [Chinese],
[TraditionalChinese], [Korean], [Portuguese],
[Russian], [Polish], [Hindi], [Vietnamese], [Thai],
or [Turkish].
Control panel section
Main menu
Monitor screen

Sony SRG-X400 Specifications

General

Type	IP security camera
PTZ modes	Digital PTZ
PTZ control	Yes
Placement supported	-
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling/Pole
Product color	White
LED indicators	LAN, Power
Pan range	-170 - 170 °
Pan speed	300 °/sec
White balance	Auto, Indoor, Manual, One push, Outdoor
Tilt angle range	-20 - 90 °
Camera shutter speed	1/1 - 1/10000 s
Minimum illumination	1.6 lx
Sensor type	Exmor
Number of sensors	1
Optical sensor size	1/2.5 \
Focus	Motorized/Manual
Digital zoom	40 x
Focal length range	4.4 - 88 mm
Maximum aperture number	3.8
Minimum aperture number	2
Closest focusing distance	0.08 m
LED type	IR
Bit rate control	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Total megapixels	8.5 MP
Gain control type	Auto/Manual
Maximum resolution	3840 x 2160 pixels
Supported video modes	720p, 1080i, 1080p, 2160p
Video compression formats	H.264, H.265
Supported graphics resolutions	640 x 360, 720 x 480, 720 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Voice codecs	AAC
Audio output channels	2 channels
Streaming method	Multicast
Supported network protocols	IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA over IP
DC output voltage	12
Power source type	DC, PoE
Power consumption (typical)	25.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Depth	200.2 mm
Width	158.4 mm
Height	177.5 mm
Weight	1800 g