Sony SRG-X400 User Manual

57
Accessing the Camera from a Web
Browser
You can access the camera from a web browser
on a computer to upgrade the firmware and to
change settings.
An IP address must be set on the camera for
access from a web browser. For details on IP
address settings, refer to “RM-IP Setup Tool
Guide.”
Enabling HTTP/RTSP in the
Camera
HTTP/RTSP in the camera must be enabled to
access the camera from a web browser. To
enable/disable the HTTP/RTSP communication,
use the CAMERA SETUP (camera setup) switch 3
(HTTP/RTSP communication use setting) on the
back of the camera and the OSD menu (SYSTEM
– HTTP/RTSP).
Notes
• After the CAMERA SETUP (camera setup) switch
3 (HTTP/RTSP communication use setting) on
the back of the camera is changed, turn off the
camera and turn it on again.
• After the SYSTEM - HTTP/RTSP setting is
changed in the OSD menu, restart the camera.
Setting-up the Computer
System configurations required for the Computer
are shown in the following (as of March 2020).
OS/Web browser
Windows
OS version
Windows 8.1 (64-bit version)
Windows 10 (64-bit version)
Web browser
Google Chrome (Recommended)
Microsoft Internet Explorer Ver.11.0
macOS
OS version
macOS 10.15
Web browser
Google Chrome (Recommended)
CPU
Intel® Core™ 7th generation (Kaby Lake) or later
(Recommended)
Memory
8 GB (Recommended)
Display
1920×1080 (Recommended)
Notes
• If the required system configurations are not
implemented, or depending on the computer
usage status, it may affect video-play
operation on a web browser.
• For Internet Explorer used on Windows 8.1, use
the Internet Explorer desktop user interface
(desktop UI) version.
• For Windows 10, turn off the tablet mode.
• Every page is optimized when the zoom
percentage is [100%] and font size is [Medium]
on a web browser.
•
If an image does not fit to the screen, set the display
setting (zoom percentage) of your computer to 100%
.
• If you use a display with high pixel density, the
zoom percentage may change automatically.
• Web pages displayed when you access the
camera are JavaScript. Web pages may not be
displayed correctly if some antivirus softwares
are used on your computer.
• When you make an SSL connection to the
camera with Internet Explorer, you may not be
able to access the camera with an IPv6 address.
In that case, access the camera with an IPv4
address or consider using Google Chrome.
HTTP/RTSP
communication
use setting
OSD menu
(SYSTEM –
HTTP/RTSP)
HTTP/RTSP
communication
ON (FORCED ON) – Enable
OFF (MENU) ON Enable
OFF Disable

Sony SRG-X400 Specifications

General

Type	IP security camera
PTZ modes	Digital PTZ
PTZ control	Yes
Placement supported	-
Connectivity technology	Wired
Form factor	Dome
Mounting type	Ceiling/Pole
Product color	White
LED indicators	LAN, Power
Pan range	-170 - 170 °
Pan speed	300 °/sec
White balance	Auto, Indoor, Manual, One push, Outdoor
Tilt angle range	-20 - 90 °
Camera shutter speed	1/1 - 1/10000 s
Minimum illumination	1.6 lx
Sensor type	Exmor
Number of sensors	1
Optical sensor size	1/2.5 \
Focus	Motorized/Manual
Digital zoom	40 x
Focal length range	4.4 - 88 mm
Maximum aperture number	3.8
Minimum aperture number	2
Closest focusing distance	0.08 m
LED type	IR
Bit rate control	Constant Bit Rate (CBR)/Variable Bit Rate (VBR)
Total megapixels	8.5 MP
Gain control type	Auto/Manual
Maximum resolution	3840 x 2160 pixels
Supported video modes	720p, 1080i, 1080p, 2160p
Video compression formats	H.264, H.265
Supported graphics resolutions	640 x 360, 720 x 480, 720 x 576, 1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160
Voice codecs	AAC
Audio output channels	2 channels
Streaming method	Multicast
Supported network protocols	IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, DHCP, DNS, RTP/RTCP, RTSP, UPnP, VISCA over IP
DC output voltage	12
Power source type	DC, PoE
Power consumption (typical)	25.5 W
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Harmonized System (HS) code	85258900

Weight and Dimensions

Depth	200.2 mm
Width	158.4 mm
Height	177.5 mm
Weight	1800 g