63
Configuring the Camera from a Web
Browser
This section explains how to set the functions of
the camera by an administrator.
For details on monitoring of the camera image,
see “Operating the Camera from a Web Browser”
(page 60).
To configure the camera with the remote
commander, see “Operations Using the Supplied
Infrared Remote Commander” (page 26).
This section explains the basic operations for
setting the Administrator menu, then explains
each option in the menu.
Note on the display of menu options
Only the current available options in the setting
menus of the camera are clearly displayed.
Grayed out options are not available.
Only supported functions are displayed.
Basic Operations of the
Administrator Menu
You can set all functions of the camera in the
Administrator menu according to the user’s
usage.
Click [Setting] on the viewer screen to display the
Administrator menu.
How to set up the Administrator
menu
1 Access the camera to display the viewer
screen.
For details, see “Accessing the Camera from
a Web Browser” (page 58).
2 Click [Setting] on the main menu.
The authentication dialog appears when you
do not perform the viewer screen
authentication procedure as an
administrator. When you enter the user
name and password for administrator, the
Administrator menu appears.
3 Click the menu (example: System) on the
left of the Administrator menu.
The selected menu is displayed.
Example: [System] menu
4 Select the desired tab above the menu and
set each option in the tab.
Example: [Date & time] tab of the [System]
menu
For details on the menu tabs and setting
options, see page 65.
5 After the settings are completed, click [OK].
The settings you have made become active.
Click [Cancel] to nullify the settings and
return to the previous settings.
Common buttons in each menu
The following common buttons are displayed in
the tab of each menu as required.
To Next Page
Need help?
General
Weight and Dimensions
