24
For HD output
When you want to switch cameras, connect a
commercially available video switcher.
For the connection to the video switcher, refer to
the operating instructions of the switcher.
* Use straight network cables.
External synchronization (BRC-
X400/X401)
For a single camera
Multiple cameras can be synchronized to a
specific reference signal.
Providing a reference signal to the EXT SYNC IN
terminal (page 10) allows the camera to be
synchronized in phase with the video signal.
Depending on the video output format the
compatible reference signal varies.
Notes
• When the reference signal is unstable, the
camera cannot be externally synchronized.
• Sub-carriers cannot be synchronized.
• 3840×2160 cannot be synchronized.
Network cable
(commercially
available)
Video monitor
Network cable
(commercially
available)
Connecting control signals
Network cable
(commercially
available)
HDMI cable (not supplied)
HDMI cable
(not supplied)
HDMI cable
(not supplied)
Video switcher
Connecting cable with
BNC connector
(commercially available)
Video output format Compatible reference
signals
1920×1080/59.94p
1920×1080/59.94i
1920×1080/29.97p
1920×1080/59.94i
720×486/59.94i (NTSC)
1280×720/59.94p 1920×1080/59.94i
1280×720/59.94p
720×486/59.94i (NTSC)
1920×1080/50p
1920×1080/50i
1920×1080/25p
1920×1080/50i
720×576/50i (PAL)
1280×720/50p 1920×1080/50i
1280×720/50p
720×576/50i (PAL)
1920×1080/23.98p 1920×1080/47.95i (23.98PsF)
Connecting cable with
BNC connector
(commercially available)
To SYNC OUT terminal
Synchronizing signal generator
To Next Page
Loading...
Need help?
General
Weight and Dimensions
