86
To display client certificate information
When the client certificate has been set in the
camera correctly, its information appears on
[Status], [Issuer DN], [Subject DN], [Available period]
and [Extended key usage].
Status
Shows if the status of the client certificate is valid or
invalid. The following statuses are recognized.
[Valid]: The client certificate is correctly stored and
set.
[Invalid]: The client certificate is not correctly stored
and set. Possible causes are as follows:
– The private key password included in the
client certificate is not specified correctly.
– The private key password is specified in
spite of the fact that the key pair in the
client certificate is not encrypted.
– The key pair is not included in the client
certificate.
Note
When the client certificate to be imported is of
PKCS#12 format and the private key password is not
set correctly
,
“<Put
correct private key
password>”
is
displayed in the boxes of [Issuer DN], [Subject DN],
[Available period] and [Extended key usage]. Specify
the correct private key password to confirm the
information of the certificate.
To delete the client certificate
Click [Delete] to delete the client certificate stored in
the camera.
Private key password
Enter the password for the private key information
included in client certificate using up to 50
characters.
Leave the text box blank if the private key
information included in the client certificate is not
encrypted.
If a private key password is already set, it is
displayed as turned letters.
Reset
To change the once set private key password, click
[Reset] and clear the current password. A new
password can be entered.
Note
Click at the bottom of the menu if you
want to cancel changing the private key password
after clicking [Reset]. Doing so restores the other
setting items in the Client certificate tab to the
previous settings.
Trusted CA certificate
You can import a trusted CA certificate (server
certificate or route certificate) to the camera. Up
to 4 certificates from trusted CAs can be
imported. Only the PEM format is supported.
To import the CA certificate
Click [Choose File] to select the CA certificate to be
imported. The selected CA certificate is imported to
the camera.
Note
The import process becomes invalid if the selected
file is not a CA certificate.
To display CA certificate information
When the CA certificate has been set in the camera
correctly, its information appears on [Issuer DN],
[Subject DN], [Available period] and [Extended key
usage].
To delete the CA certificate
Click [Delete] to delete the CA certificate stored in
the camera.
Referer check tab
Referer check is the function that checks if the
web page which requires access to the camera is
authorized. If the web page is not authorized, the
camera denies access of the web page.
If you want to access from web pages other than
the one that the camera provides, register their
host names and port numbers in the [Exception
list].
Referer check
Enable
Select the checkbox to enable the Referer check.
Exception list
Register the hosts that are not targeted for the
Referer check.
No.
Select the registration number for the Exception list.
To Next Page
Need help?
General
Weight and Dimensions
