119
GB
Adjusting Settings
Notes
• Video signals are not output from the
COMPONENT VIDEO MONITOR OUT or
MONITOR VIDEO OUT jacks when the monitor,
etc., is connected to HDMI OUT jack.
• If you select a resolution that the connected TV
does not support in the “Resolution” menu, the
images from the TV cannot be output correctly.
• Converted HDMI image output does not support
x.v.Color (x.v.Colour), Deep Color (Deep Colour)
and 3D.
HDMI settings
Makes the required settings for components
connected to the HDMI jacks.
Lets you turn the function which controls
components connected to the HDMI jack
using an HDMI cable on or off.
x OFF
x ON
Note
When “Control for HDMI” is set to “ON,” “Audio
Out” may be changed automatically.
Lets you output the HDMI signals to the TV
even when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 97).
x OFF
x ON
Note
When “Control for HDMI” is set to “OFF,” you
cannot set “Pass Through.”
Lets you set the HDMI audio signals output
from the playback component connected to the
receiver via an HDMI connection.
x TV+AMP
The sound is output from the TV speaker and
the speakers connected to the receiver.
Control for HDMI
Pass Through
Audio Out
continued
To Next Page
Loading...
Need help?
General