Sony STR-DA3600ES User Manual

98
GB
3 Select “Pass Through,” then
press or b.
4 Select the parameter you want,
then press or b.
Note
This function does not work when “Control for
HDMI” is set to “OFF.”
Switching between
digital and analog audio
When you connect components to both digital
and analog audio input jacks on the receiver,
you can fix the audio input mode to either of
them, or switch from one to the other,
depending on the type of material you intend
to watch.
In addition, the Audio Return Channel (ARC)
function is available by selecting “AUTO,” if
TV input is selected and your TV is
compatible with the Audio Return Channel
(ARC) function. When using this function,
you can output the TV sound to the receiver
via an HDMI cable connected to the HDMI
OUT jack without connecting the TV AUDIO
IN or TV OPTICAL jacks.
This operation cannot be performed using the
simple remote.
1 Select the input source using
the input buttons.
2 Press SHIFT, then press the
INPUT MODE.
The selected audio input mode appears in
the display window.
•AUTO
Gives priority to digital audio signals
when there are both digital and analog
connections.
If there are no digital audio signals,
analog audio signals are selected.
Parameter Explanation
ON When the receiver is in the
standby mode, the receiver
continuously outputs HDMI
signals from the receiver’s
HDMI OUT jack.
OFF The receiver does not output
HDMI signals when in the
standby mode. Turn on the
receiver to enjoy the
connected component’s
source on the TV. This
setting saves power in the
standby mode, compared
with the “ON” setting.
SHIFT
INPUT
MODE
Input
buttons

Sony STR-DA3600ES Specifications

General

Brand	Sony
Model	STR-DA3600ES
Category	Receiver
Language	English