305
Timeline Menu Display Settings
The Timeline menu shows a timeline for each region, but
you can also restrict the regions to be shown.
Timeline Assign menu
Open the Key Frame >Timeline Assign menu (6115).
The right of the status area shows a list of the regions
(including Global) assigned to the region selection buttons
in the numeric keypad control block. The left shows the
regions in order of precedence, and whether each region is
shown on the Timeline menu.
Setting Timeline menu display items
In the Key Frame >Timeline Assign menu (6115), press
[Active Region] to carry out the setting.
When [Active Region] is enabled (lit): The regions for
which the region selection buttons in the numeric
keypad control block are lit are shown in the
precedence order set in this menu, followed by the
regions for which the buttons are off, in the same
order.
When [Active Region] is disabled (off): The regions
appear according to the precedence order and display
on/off setting set in this menu.
Setting the display order of regions
To change the precedence order, insert and delete regions
in the list, in the desired order.
1
In the Key Frame >Timeline Assign menu (6115),
select the desired precedence order position and the
region you want to insert.
2
In the <Priority> group, press [Insert].
This inserts the selected region before the specified
precedence order.
If the inserted region is already present in a different
precedence order, it is deleted from that precedence
order.
3
To delete a region from the precedence order, select
the precedence assigned to the region.
4
In the
<Priorit
y> group, pr
ess [Delete]
.
This deletes the selected region from the precedence
order list.
Setting the display of regions on or off
When [Active Region] is disabled, select which regions
are displayed in the Timeline menu.
1
In the Key Frame >Timeline Assign menu (6115),
select the region.
2
Press the [Display] button to set the display on or off.
To disable the display, press [Display], turning it off.
To enable the display, press [Display], turning it on.
To return to the default precedence order and
timeline menu display settings
In the <Priority> group, press [Default].
To Next Page
Need help?
General
