FM radio
About the FM radio
The FM radio in your device works like any FM radio. For example, you can browse and
listen to FM radio stations and save them as favorites. You must connect a wired
headset or headphones to your device before you can use the radio. This is because the
headset or headphones act as an antenna. After one of these devices is connected, you
can then switch the radio sound to the speaker, if desired.
When you open the FM radio, available channels appear automatically. If a channel has RDS
information, it appears a few seconds after you start listening to the channel.
To start the FM radio
1 Connect a headset or a set of headphones to your device.
2 From your Home screen, tap .
3 Find and tap FM radio . The available channels appear as you scroll through
the frequency band.
When you start the FM radio, available channels appear automatically. If a channel has RDS
information, it appears a few seconds after you start listening to the channel.
To move between radio channels
• Flick your finger left or right along the frequency band.
• Drag the tuning dial right or left.
To select the radio region
1 When the radio is open, press .
2 Tap Set radio region.
3 Select an option.
To adjust the visualizer
1 When the radio is open, tap .
2 Tap Visualizer.
3 Select an option.
FM radio overview
50
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
Need help?
General