Legacy U.S.A. (E)
5-36
J Rewind button (REW)
To rewind the tape, press the “REW” button. The display will indicate
“REW”. To stop rewinding, press the “REW” or “TAPE” button.
J Stop and eject button (
)
When “
” button is pressed, play back stops and the cassette tape is
ejected.
The ejection function also operates when the ignition switch is turned off.
Always make certain that you remove the cassette tape.
J Tape program sensor button (TPS)
B Blank skip
When the “TPS” button is pressed, the “TPS” indicator will come on
and the player will automatically skip any blank portion of 15 second
or more and play the next program, even if it is on the other side. To
cancel blank skip mode, press the “TPS” button again.
B Blank search
Press “TPS” button during playback to return to the beginning of the
current selection or to skip to the beginning of the next selection. To
use this function, press the “TPS” button to turn on the “TPS” indicator.
If the fast-forward button “FF” is then pressed, the player advances
the tape to the beginning of the next selection and starts playing it. If
the rewind button “REW” is pressed instead, the player rewinds the
tape to the beginning of the current selection and starts replaying it.
The “TPS” function may not operate properly under the following
conditions:
D When the recording level is low.
D When there are long pauses in the middle of a selection.
D When the tape contains verbal material such as conversations.
D When the blanks between selections are shorter than five seconds.
D When there are no blanks between selections (live concerts, etc.).
J Repeat button (RPT)
Push the “RPT” button to repeat the piece of music being listened to. To
use this function, push the “RPT” button while the piece you want to hear
To Next Page
Loading...
Need help?
General
