Legacy U.S.A. (E)
5
Audio
5-37
– CONTINUED –
again is being played. “RPT” will be indicated on the display. When the
selection ends, the cassette player automatically rewinds to the begin-
ning of the piece and the selection begins again. To cancel the repeat
function, push the “RPT” button again. Until the repeat function is can-
celled, the same piece of music will be repeated indefinitely. The “RPT”
function may not operate properly under the following conditions:
D When the recording level is low.
D When there are long pauses in the middle of a selection.
D When the tape contains verbal material such as conversations.
D When the blanks between selections are shorter than five seconds.
D When there are no blanks between selections (live concerts, etc).
J Dolby NR button (
)
Press “
” button when playing tapes recorded using the Dolby NR
system*. The “
” indicator will light up and high-frequency noise on
the tape will be reduced for clearer sound reproduction.
* Noise reduction system manufactured under license from Dolby Laboratories
Licensing Corporation. “Dolby” and double-D Symbol are trade marks of Dolby
Laboratories Licensing Corporation.
J Auto metal sensor
The cassette player automatically adjusts for metal or CrO
2
tape.
J Metal tape button (MTL)
If metal or CrO
2
tape has been inserted into the cassette slot, “MTL” will
be indicated on the display.
To Next Page
Loading...
Need help?
General
