Legacy U.S.A. (E)
10-58
J Front turn signal, parking light and front side marker light
HB0298
1. Remove the front turn signal light assembly mounting screw located
at the top of the headlight assembly using a phillips screwdriver.
2. Move the front turn signal light assembly forward until it pops out from
the fender.
3. Remove the bulb holder from the front turn signal light assembly by
turning it counterclockwise.
4. Pull the bulb out of the socket. Install a new bulb.
5. Set the bulb holder into the front turn signal light assembly and turn it
clockwise until it locks.
6. Set the front turn signal light assembly into the fender. Tighten the
mounting screw.
To Next Page
Loading...
Need help?
General
