20îî
5 Installing Inverter onto Wall
Installation shall comply with local regulations and technical rules. Installation shall
comply with the relevant instructions of AS 4777.1.
5.1 Selecting Installation Location
Selecting an optimal installation location for the inverter is decisive for its operating
safety as well as its expected efficiency and service life.
y
Take the load capacity of the wall into account. The wall (such as concrete wall
and metal structure) should be strong enough to hold the weight of the inverter
over a long period of time.
y
Install the unit where is accessible to install, electrical connect or service.
y
Do not install the unit on the wall of flammable
materials.
y
Do not install the inverter where contains flammable
materials or flammable gas in the vicinity of the unit
installation.
To Next Page
Loading...
Need help?
General