20
4.4 Storage of the Inverter
If the inverter is not to be installed immediately after delivery, store it appropriately:
• Store the inverter indoors, for example, large warehouse or workshop, to prevent
possible condensation or damp. If the inverter has to be stored outdoors, elevate the
inverter base according to the geological and ambient conditions. When the ambient
temperature is too low, heat the inverter internal devices.
• Temperature: -40°C~+70°C. Relative humidity: 0 ~ 95%, and non-condensation.
Store the inverter on a dry, clean, and solid ground with sufficient load-bearing
capacity. The ground should be flat without water, bumps, or plantings.
• Lock the inverter internal devices and the inverter during storage.
• Take proper protective measures to prevent the water and dust penetrating into the
inverter. Protect the inverter air inlets and outlets at least.
• Regularly, check the inverter and internal devices, at least once every half a month.
4 Delivery System Manual
To Next Page
Loading...
Need help?
General
