61
-- -- EEnndd
9.5 Language Setting
9.5.1 Conventional Way
step 1 Tap “Function” from the default menu.
step 2 Tap “Set-parameter”.
step 3 Tap “Sys-parameter” after entering the correct password.
step 4 Tap “Language & Firmware Ver.” and enter into the language and firmware version
sub-menu.
step 5 Select the desired language.
-- -- EEnndd
9.5.2 Shortcut
The language setting shortcut (shown by A) is at the lower right corner of the Home
menu. Select either language by tapping the language button.
By tapping the button, the language will switch among English, Chinese and the like.
The language displayed on the button is the present display language.
9.6 Setting Date and Time
step 1 Tap “Function” from the default menu.
step 2 Tap “Set-parameter”.
step 3 Tap “Sys-parameter” after entering the correct password.
step 4 Tap “Time” and enter into the date and time setting sub-menu.
step 5 Set the “Year”, “Month”, “Date”, “Hour”, “Minute” and “Second”. Tap the
corresponding field and the keypad will appear.
step 6 Set the time and date by tapping the keypad and confirm setting by tapping “Enter”.
System Manual 9 LCD Menu Operation
To Next Page
Loading...
Need help?
General
