Sungrow SG2500HV-30 User Manual

66
• Set parameter from the Network Parameter interface for IP address, subnet mask,
etc.
-- -- EEnndd
9.13.2 Running Parameters
SSeettttiinngg RRuunnnniinngg PPaarraammeetteerrss
step 1 Tap “Function” from the default menu.
step 2 Tap “Set-parameter”.
step 3 Tap “Run-parameter” after entering the correct password.
step 4 Set the running parameter by tapping the pop-up keypad and tap ENTER to confirm
setting. Tap “Prev” or “Next” to turn pages up or down.
-- -- EEnndd
9.13.3 Protection Parameters
SSeettttiinngg PPrrootteeccttiioonn PPaarraammeetteerr
step 1 Tap “Function” from the default menu.
step 2 Tap “Set-parameter”.
step 3 Tap “Pro-parameter” after entering the correct password.
step 4 Set the protection parameter by tapping the pop-up keypad and tap ENTER to confirm
setting. Tap “Prev” or “Next” to turn pages up or down.
-- -- EEnndd
9 LCD Menu Operation System Manual

Sungrow SG2500HV-30 Specifications

General

Brand	Sungrow
Model	SG2500HV-30
Category	Inverter
Language	English