POWER UNIT 7-19
DISASSEMBLY
1. Remove four (4) bolts 1 and upper cylinder head cover 2 .
NOTE:
Intake rocker arm shaft is different from exhaust rocker arm shaft.
Take note of shaft shape difference and placement.
2. Remove the eight (8) bolts 1 securing rocker arm shaft brack-
ets, then remove rocker arm shaft brackets 2 .
Remove intake rocker arm shaft 3 and exhaust rocker arm
shaft 4 .
Remove all rocker arms 5 and springs 6 .
3. Remove two (2) screws 7 and camshaft thrust plate 8 .
4. Remove camshaft 9 pulling toward the timing sprocket side.
NOTE:
Pull out camshaft toward timing sprocket side.
Intake rocker arm shaft
Exhaust rocker arm shaft
Flywheel side