4-6 ELECTRICAL
Fuse case
• Disconnect fuse case lead wires from engine wiring harness
and starter motor relay terminal.
INSTALLATION
Installation is reverse order of removal with special attention to
the following step.
• Battery charge coil
• Apply Thread Lock 1342 to the coil securing screws.
I 99000-32050 : Thread Lock 1342
• Wire routing
• Check wire routing. (See page 11-2 to 11-13)
Rectifier & regulator
• Remove two bolts securing the Rectifier & regulator.
• Disconnect lead wire connectors.
To Next Page
Loading...
