ENGINE 3-61
CRANKSHAFT JOURNAL BEARING
INSPECTION
• Inspect the crankshaft journal bearings for any damage.
• If any, replace them with a specified set of bearings.
SELECTION
• Inspect the crankshaft journal for any damage.
• Measure the crankshaft journal O.D. with the special tool.
& Crankshaft journal O.D.
Standard: 41.985 – 42.000 mm
(1.6529 – 1.6535 in)
" 09900-20202: Micrometer (25 – 50 mm)
• Select the specified bearings from the crankcase bore I.D.
code. The crankcase bore I.D. code
1 “A”, “B” or “C”, is
stamped on the inside of each crankcase half.
Bearing selection table
& Crank shaft journal I.D.
Crankcase I.D.
1
ABC
Bearing color Green Black Brown
I.D. code
1 I.D. specification
A
46.000 – 46.006 mm
(1.8110 – 1.8113 in)
B
46.006 – 46.012 mm
(1.8113 – 1.8115 in)
C
46.012 – 46.018 mm
(1.8115 – 1.8117 in)
PartShark.com
877-999-5686
To Next Page
Loading...
Need help?
General
