8-4 ELECTRICAL SYSTEM
USING THE MULTI CIRCUIT TESTER
• Properly use the multi circuit tester

+ and

- probes.
Improper use can cause damage to the motorcycle and
tester.
• If the voltage and current values are not known, begin mea-
suring in the highest range.
• When measuring the resistance, make sure that no voltage is
applied. If voltage is applied, the tester will be damaged.
• After using the tester, be sure to turn the switch to the OFF
position.
"
Before using the multi circuit tester, read its instruction
manua
l.
PartShark.com
877-999-5686
To Next Page
Need help?
General
